YC-400 Automatic Encrusting Machine
YC-400 Automatic Encrusting Machine alos e bitsoang YC-400 Encruster kapa YC-400 Extruding Machine, ke lisebelisoa tsa ho lokisa lijo tse sebelisoang haholo ho etsa lijo tse fapaneng tse tlatsitsoeng.Molao-motheo o sebetsang oa YC-400 Automatic Encrusting Machine o kenyelletsa letoto la metsamao ea mochini e tlatsang hlama le ho tlatsa hammoho ka karolo e itseng.Ka mor'a moo, ka liketso tse kang ho khaola, e hlahisa lijo tse feletseng.Maemo a ts'ebeliso ea mochini oa YC-400 Automatic Encrusting Machine a atile, a kenyelletsa limela tse fapaneng tsa ho lokisa lijo, lireschorente, lihotele le libaka tse ling.Litlhophisong tsena, YC-400 Automatic Encrusting Machine e ka ntlafatsa katleho ea tlhahiso le boleng ba sehlahisoa, ea ba etsa lisebelisoa tsa bohlokoa ts'ebetsong ea sejoale-joale ea lijo.
Technical Parameters
| YC-400 Automatic Encrusting Machine |
| Bokhoni: 10-100pcs / min |
| Boima ba sehlahisoa: 10-1500g |
| Matla: 4KW |
| Motlakase: 220V, 50 / 60Hz, 1Phase |
| Boima: 1810 * 1000 * 1380mm |
| Boima ba 'mele: 450KG |
Sebopeho sa YC-400 Automatic Encrusting Machine
1. Hopper:
YC-400 Automatic Encrusting Machine e na le li-hopper tse peli, e 'ngoe bakeng sa hlama le e' ngoe bakeng sa ho tlatsa.
2. Rectifier:
Ka li-paddles, e arola ka ho lekana thepa e tala ka likarolo tse lekanang.
3. Mold tube:
E tlatsa ho tlatsa bohareng ba hlama.
4. Cutter:
E khaola kholomo ea hlama e tlatsitsoeng ka lihlahisoa tsa boholo bo lekanang le boima ba 'mele.
5.Lebanta la conveyor:
E beha lijo tse entsoeng holim'a lebanta la conveyor.
6.Flour sprinkler:
E fafatsa phofo holim'a lebanta la conveyor ho thibela lijo ho khomarela ho lona.
7. Lebokose la litšila:
E hula lisebelisoa tse tala tse khomaretsoeng lebanta ka lebokoseng la litšila.
8.Lebokose la motlakase:
Enjene ea mochini, inverter, le PLC kaofela li kentsoe ka lebokoseng le ka morao ho mochini.
Lethathamo la Tlhahiso ea Lijo
Bolelele ba Lijo
Karolelano ea Krust le Ho Tlatsa
Mefuta ea Boima ba Lijo
YC-400 Automatic Encrusting Machine Spare List
|
| Ntho | Brand |
| 1 | Mokhoa oa ho fetola | XUNG (Shanghai) |
| 2 | Skrine se thetsoang | DELTA (Taiwan) |
| 3 | PLC | |
| 4 | Frequency Invertor | |
| 5 | Phetoho ea Matla | |
| 6 | Sebeletsa Motor | |
| 7 | Sebeletsa Mokhanni oa Likoloi | |
| 8 | Lebanta la Synchronous | Mitsuboshi(Japan) |
| 9 | Phokotso Motor | Nissei(Japan) |
| 10 | Planet Gear Speed Reducer | VIGE (Dongguan) |
| 11 | Relay ea Mahareng + Base | CHINT |
| 12 | AC Contactor | |
| 13 | Seqhenqha | |
| 14 | Sekhahla Motor | OTG |
| 15 | Intermix Motor | |
| 16 | Motlakase oa Boraro oa ho Tlatsa | |
| 17 | Conveyor Motor | ZOYOY |
| 18 | Lerōle Motor | |
| 19 | Speed Adjuster | |
| 20 | Lebanta la Conveyor (PU , 3260×130mm) | YONGLI (Taiwan) |
| 21 | Bearings | HRB(Harbin), |
| 22 | Palo ea li-volts | 220V,50HZ,Mokhahlelo o le Mong |
Lipotso tsa Mochini oa YC-400 oa Mochini o Ikemetseng
1.Ke mefuta efe ea lijo tse tlatsitsoeng tse ka hlahisoang ke mochini oa YC-400 Automatic Encrusting Machine?
YC-400 e sebetsa ka mefuta-futa 'me e ka sebelisoa ho etsa mefuta e fapaneng ea lijo tse tlatsitsoeng, ho kenyeletsoa likuku, li-dumplings le lihlahisoa tse ling tse tlatsitsoeng.
2.Molao-motheo oa ho sebetsa oa YC-400 Automatic Encrusting Machine ke ofe?
Mochine o sebetsa ho latela letoto la metsamao ea mochini e kopanyang hlama le ho tlatsa ka likarolo tse nepahetseng.Liketso tse latelang, tse kang ho khaola, li fella ka tlhahiso ea lijo tse feletseng.
3.Mochineng oa YC-400 o ka sebelisoang ka mokhoa o fe?
Mochini o loketse litlhophiso tse fapaneng, ho kenyeletsoa lifeme tsa ho lokisa lijo, lireschorente, lihotele le libaka tse ling tse amehang tlhahisong ea lijo.
4.Ke likarolo life tse ka sehloohong tsa Mochini oa YC-400 oa ho Iketla ka Boithaopo?
Mochini o na le likarolo tse 'maloa, ho kenyelletsa le li-hoppers bakeng sa hlama le ho tlatsa, se lokisa bakeng sa ho ajoa ha thepa e tala, tube ea hlobo bakeng sa ho tlatsa, seha bakeng sa sebopeho, lebanta le tsamaisang lipalangoang, sefafatsi sa phofo, lebokose la litšila le. lebokose la motlakase le nang le enjene, inverter le PLC.
5.Melemo ea YC-400 Automatic Encrusting Machine ke efe?
Mochine o fana ka melemo e 'maloa, ho kenyelletsa le boemo bo phahameng ba ho iketsetsa, boleng bo tsitsitseng ba sehlahisoa, bokhoni ba ho hlahisa lijo tse fapa-fapaneng, boiketlo ba ts'ebetso le tlhokomelo, le ho iketsetsa mananeo bakeng sa lipuo tse sa tšoaneng le lihlahisoa tsa lihlahisoa.
6.Na Mochini oa YC-400 oa Automatic Encrusting o ka sebetsana le lihlahisoa tse nang le litlatsetso tse ngata kapa mebala?
E, mochine o na le khetho ea ho kenya li-hopper tse 'nè, ho lumella tlhahiso ea lihlahisoa tse nang le ho tlatsa tse tharo kapa mebala.
7.Na ho na le likhetho tsa boikhethelo kapa lisebelisoa tse fumanehang bakeng sa Mochini oa YC-400 oa Automatic Encrusting Machine?
Ee, likhetho tsa boikhethelo li kenyelletsa likarolo tse ling tsa SUS304, sekoaelo sa tšireletso se sehang, le sekoaelo sa polokeho ea hopper.
8.Ts'ebetso ea ho hloekisa e nolofalitsoe joang bakeng sa Mochini oa YC-400 Automatic Encrusting Machine?
Mochini o entsoe ka likarolo tse kang tube e atolositsoeng ea hlobo, e fokotsa nako ea ho hloekisa ka 80%.Ho feta moo, tube ea ka hare ea ho tlatsa e nka theknoloji ea Rheon ea Japane, e netefatsa hore thepa ea pele e ntlafala le ho hloekisa habonolo.
9.Na YC-400 Automatic Encrusting Machine e loketse lihlahisoa tse nang le oli e ngata?
Ee, hopper ea mochini e na le sesebelisoa se koalang ho thibela ho lutla, ho etsa hore e loketse lihlahisoa tsa lijo tse nang le oli e ngata.
10.Ke tšobotsi efe e ikhethang ea sebopeho sa ho kopanya mochine oa YC-400 Automatic Encrusting Machine?
Sebopeho sa ho kopanya se lumella ho lokisoa ha boreleli le ho tiea ha hlama e ka ntle, ho nolofalletsa tlhahiso ea lihlahisoa tse potolohang tse kang li-cookie tse mebala e 'meli, li-cookie tse sothehileng, le li-cookie tsa spiral.
11.Mochini oa YC-400 Automatic Encrusting Machine o tiisa joang tšireletso ea lihlahisoa tse tala le ho tlatsa nakong ea tlhahiso?
Mochini o sebelisa mokhoa oa ho phunya sekoti, o nang le sekontiri se senyenyane se ka pele, se fokotsang tšenyo ea ho tlatsa.Karolo ea ho qetela e etselitsoe hore e be e tiileng, e fokotsang kotsi ea tšenyo.
12.Seabo sa sekoahelo mochining oa YC-400 Automatic Encrusting Machine ke ofe, hona se kenya letsoho joang ho phallong ha thepa e boreleli?
Rectifier, ka li-paddles, e potoloha likhato tse 90 bakeng sa ho sututsa thepa, e leng ntlafatso ho feta mechini e meng e potolohang likhato tse 180.Moqapi ona o sireletsa lisebelisoa tse tala, ho netefatsa hore thepa e phalla hantle.
13.Na mochini oa YC-400 Automatic Encrusting Machine o ka amohela liforomo tse fapaneng tsa sehlahisoa, hona o ka tšoara tse kae ka hlooho?
Mochini o khona ho tšoara ka hlooho liforomo tse fapaneng tsa lihlahisoa tse 99, o lumella ho fetoha habonolo ha tlhahiso.Puo ea lenaneo e ka tloaeleha, e tšehetsa lipuo tse kang Senyesemane, Serussia, Searabia, Sepanish, Sepotoketsi le tse ling.
14.Ke thekenoloji efe e sebelisoang bakeng sa li-paddles le screw connection ea rectifier, 'me bohlokoa ba eona ke bofe?
Ho sebelisoa theknoloji ea electrolysis, e fana ka qetello e ntle ho li-paddles le ho hokahanya ha screw ea rectifier.Theknoloji ena hajoale e sebetsa feela mochining oa YC-400 le oa Japane oa Rheon.
15.Mochini oa YC-400 Automatic Encrusting Machine o sebetsana joang le ts'ebetso ea ho hloekisa, 'me ke peresente efe ea nako ea ho hloekisa e ka bolokehang?
Moralo oa mochini, o nang le tube e atolositsoeng ea hlobo le theknoloji e sebetsang e sebetsang ea ho tlatsa kahare, e boloka hoo e ka bang 80% ea nako ea ho hloekisa, e thusa ho lokisoa habonolo.
16.Ke likarolo life tsa polokeho tse fumanehang e le khetho ea boikhethelo bakeng sa Mochini oa YC-400 oa Automatic Encrusting Machine?
Likarolo tsa boikhethelo tsa polokeho li kenyelletsa likarolo tse ling tsa SUS304, sekoaelo sa tšireletso se sehang, le sekoaelo sa polokeho ea hopper, se netefatsang polokeho ea basebelisi nakong ea ts'ebetso ea mochini.
17.Na mochini oa YC-400 Automatic Encrusting Machine o ka sebelisoa bakeng sa meralo e ncha ea sehlahisoa, joalo ka likuku tsa mebala e 'meli le likuku tse sothang?
Ee, sebopeho se ikhethileng sa mochini oa ho kopanya ke ntho e hlahelletseng, e lumellang tlhahiso ea lihlahisoa tse potolohang joalo ka li-cookie tse mebala e 'meli, li-cookies tsa twist, le li-cookies tsa spiral, tse fanang ka mefuta e mengata ea meralo ea lihlahisoa.
18.Ke katoloso efe ea nako e tlang kapa bokhoni bo ka khonehang ka mochini oa YC-400 Automatic Encrusting Machine?
Mochine o etselitsoe ho lumella ho kenngoa ha li-hopper tse 'nè, ho nolofalletsa tlhahiso ea lihlahisoa tse nang le ho tlatsa tse tharo kapa mebala e meraro, ho fana ka phetoho e eketsehileng bakeng sa linyehelo tse fapaneng tsa lihlahisoa.
19.Ke likhetho life tsa lipuo tse teng bakeng sa ho hlophisoa ha mochini oa YC-400 Automatic Encrusting Machine?
Puo ea lenaneo e ka khoneha, 'me mochine o tšehetsa lipuo tse fapa-fapaneng, ho akarelletsa le Senyesemane, Serussia, Searabia, Sepanish, Sepotoketsi le tse ling.
20.Mochini oa YC-400 Automatic Encrusting Machine o kenya letsoho joang ho sireletsa lihlahisoa tsa lijo tse nang le oli e ngata?
Hopper e na le sesebelisoa sa ho tiisa, se thibelang ho tsoa ha oli le ho netefatsa hore lihlahisoa tsa lijo tse nang le oli e ngata li lula li le teng nakong ea tlhahiso.
Nako ea poso: Jan-10-2024